Deck, Fittings, Safety Equipment

• Check stanchion, pulpits and lifelines for integrity
• Check ground tackle, lines, fenders, etc.
• Check chainplates and cleats
• Check hull/deck joint
• Check deck, windows, and port lights for leaks
• Inspect anchor windlass and lubricate
• Clean and grease winches
• Check and lubricate blocks, pad eyes, etc.
• Check dinghy, and life raft

Electrical System and Components

• Check battery water level
• Check/recharge batteries
• Check terminals for corrosion, clean and lubricate
• Check bonding system
• Inspect all wiring for wear and chafe
• Test all gauges for operability
• Check shore power and charger
• Check for spare fuses
• Check all lighting fixtures (including navigation lights) and make sure you have spare bulbs
• Check all electronics for proper operation
• Inspect antennas

Inboard Engine(s)

• Change oil & filters - have spare onboard
• Check and change fuel filters - have spares onboard
• Check and change engine zincs
• Check cooling system change coolant as necessary - have extra onboard
• Record engine maintenance log, especially date & hours of last oil changes
• Check belts for tension
• Check transmission fluid
• Check and clean backfire flame arrestor
• Check impeller
• Check and clean water strainer
• Check bilge blower

Water System

• Flush water tank
• Check water system and pump for leaks and proper operation
• Check hot water tank working on both AC and engines
• Check for tank cap keys on board
• Check and clean shower sump pump screens

Head System

• Checked for smooth operation - lubricate and clean as necessary
• If equipped with treatment system, have chemicals on hand
• Y-valve operation checked, valve labeled & secured

Mast and Rigging

• Check mast and spreaders for corrosion or damage
• Inspect spreader boots and shrouds
• Inspect rivets and screw connections for corrosion
• Check reefing points and reefing gear
• Clean sail track
• Check rigging, turnbuckles and clevis pins for wear and corrosion
• Inspect stays for fraying and "fish hooks"
• Check forestay and backstay connections
• Check masthead fitting and pulleys
• Check and lubricate roller furling
• Check halyards and consider replacing or swapping end for end
• Tape turnbuckles, cotter pins, and spreaders
• Recaulk through-deck chainplates as necessary (generally, once a decade)

Required and Recommended Equipment

• Sound signaling device
• Check distress signals and expiration date
• Check PFDs
• Inspect life rings
• Check fire extinguishers and recharge if necessary
• Check and adjust compass
• Check navigation lights
• Check charts and replace as necessary
• Check radar reflector
• Check and replace first aid supplies
• Check bailer and hand pump

Hull

• Check for hull abrasions, scratches, gouges, etc. and repair
• Check and replace zincs
• Check for blisters and refinish is necessary
• Check rub rails
• Check swim platform and/or ladder
• Inspect and test trim tabs
• Check shaft, cutlass bearing, strut and prop
• Check rudder and fittings
• Touch up or replace antifouling paint